SpiffinChicken  posted on Apr 28, 2018 1:13:14 PM - Report post

My pilots come back uninjured so long as I check Mechs after one of them is hit.

Use the option for Mega Armor HP or Mega System HP, it shows on the mech (bottom right) in WHITE the areas that are weaker - after mousing over ALL areas it will update with the new higher values then turn those trainer options off once done. The chance to hit the pilot with all that armor should be vastly reduced.

yamatokira54  posted on Apr 28, 2018 1:35:21 PM - Report post

The head shots are problematic, i use the System and Armor cheat yet the pilots are still injured if the mech gets a head shot, or maybe if it is staggered enough to fall on the ground. Otherwise the mechs get minimal damage if any since it has so much armor attached.

If your pilot is injured grab a job that is longer away then however many days your pilot neds to recover.

tontsa00  posted on Apr 28, 2018 1:53:20 PM - Report post

Btw folks, i've notieced that certain trainer options didn't work well while playing. And even when i used "Mega selected Armor HP/System HP" it took about 30 seconds for each to hear "activated".

Then after a mission i've noticed some fps drops while i was days to pass, and eventually my PC crashed.

I went to see if anyone else had problems, but i thought it wasn't the trainer itself, what if it could have been latest Nvidia driver 397.31? I read about that driver version and many people claimed that driver version was causing issues.

So naturally i uninstalled that driver using DDU (Display driver uninstaller) installed driver version 391.35, and surprise, all trainer options worked fine afterwards and haven't got any issues.

So if you have Nvidia driver version 397.31 installed, i suggest you uninstall it and install 391.35 driver instead.

Hope this helps if anyone else is having issues with trainer options not working properly.

DarkKing666  posted on Apr 28, 2018 3:15:49 PM - Report post

Regarding the C-Bill option - this is a heads up regarding the internal game mechanism.

I've seen some people report that the game crashes if you get over 900 million. I haven't seen this, but I can report that if you get over 2 billion (2,000,000,000) then the C-Bill value rolls over and becomes NEGATIVE 2 billion. Accompanied by a "boss, we're broke" message from your XO.

So play it safe. Be careful about going beyond 900 million, and avoid exceeding 2 billion.

Although I'd like to hear from others if they've encountered the same issue. If this is a constant (and not just my system) then maybe a small note in the trainer instructions could be of help.

silverstorm  posted on Apr 28, 2018 4:33:32 PM - Report post

trainer somehow causes bankrupt no errors or anything just outright bankrupt, then puts it at negative i did as wolf_x said....yeah I dumb....but really why would it make it negative.

i always get injures for my pilots when i don't brace or whatever, ai gets lucky on pilot injures than I do but eh

[Edited by silverstorm, 4/29/2018 12:12:06 AM]

Wolf_X  posted on Apr 28, 2018 6:04:56 PM - Report post

My guess is you were adding to much money, dont forget to turn it off after you added some money (or it keep adding 100 million each time you buy something).

About headshots/dmg to pilot, try to stabilize mechs before they fall (brace/pull back into cover) and avoid standing in cover so just your head shows (standing on top of mountains is my favorite ) Almost never had more than one injury on any pilot that way.

xkingrodx  posted on Apr 28, 2018 11:02:44 PM - Report post

I must be doing something wrong... I am trying to add C-Bills, but it's not doing anything.
I activate the trainer, then go to the game main menu and press F1, then it says trainer activated, but when I go to the shop, buy a heatsink, for example, then press numpad0 and get the activated warning, if I purchase it again I don't get any money at all...
Can I have some help?

SubXero  posted on Apr 28, 2018 11:52:31 PM - Report post

27 pages for a game that just released? wow